προϊόντα

Σπίτι / προϊόντα / τρυπάνι /

R32 Round Extension Drill Rods: The Ultimate Guide to Performance and Durability

Ονομασία μάρκας:	HLDRILL
Μούβ:	10 ΤΕΜ
Τιμή:	Please contact us
Όροι πληρωμής:	T/T
Ικανότητα εφοδιασμού:	3000 το μήνα

Πληροφορίες λεπτομέρειας

Περιγραφή προϊόντων

Πληροφορίες λεπτομέρειας

Τόπος καταγωγής:

Κίνα

Πιστοποίηση:

ISO 9001 Certified

Τύπος νήματος:

R32

μορφή ράβδων:

Γύρω

Κοινά μήκη:

610mm έως 6400mm

Υλικό:

Υψηλής ποιότητας κράμα χάλυβα (42CrMo,23CrNi3Mo,45CrNiMoVA)

Επεξεργασία:

Ενανθράκωση ή επαγωγική σκλήρυνση υψηλής συχνότητας

Διάμετρος ράβδου:

Στρογγυλό συμπαγές σώμα 32mm

Ενιαίο μικτό βάρος:

58 – 62 HRC Υψηλή αντίσταση στη φθορά

Συμβατά τρυπάνια:

Atlas Copco, Sandvik & All Major Drifters

Εφαρμογές:

Εξόρυξη, διάνοιξη σήραγγας, θεμελίωση, γεωτρήσεις βράχου

Συσκευασία λεπτομέρειες:

Ξύλινα Κουτιά, Κουτιά από χαρτόνι

Επισημαίνω:

R32 round drill rods

extension drill rods for durability

high-performance R32 drill rods

Περιγραφή προϊόντων

R32 Round Extension Drill Rods: The Ultimate Guide to Performance and Durability

In the demanding world of rock drilling, the efficiency of your drill string is only as strong as its weakest link. For mid-range hole drilling in mining and tunneling, the R32 Round Extension Drill Rod has become the industry benchmark.

Whether you are operating in a surface quarry or an underground development, understanding the technical advantages of R32 rods is key to reducing your cost-per-meter.

What is an R32 Round Extension Drill Rod?

An R32 Round Extension Drill Rod is a high-performance drilling component featuring R32 (32mm) rope threads on both ends. Unlike hexagonal rods, the round cross-section is preferred for extension drilling because it provides higher rigidity, better energy transmission, and a lighter weight-to-strength ratio for deeper applications.

Benefits

1. Superior Energy Transmission

The R32 thread design is engineered to minimize energy loss at the couplings. The round rod geometry ensures that the impact energy from the rock drill’s piston travels straight to the drill bit, resulting in faster penetration rates (ROP).

2. High Fatigue Strength
Modern R32 rods undergo a carburizing process. This chemical heat treatment creates a hard, wear-resistant outer layer while maintaining a ductile core. This allows the rod to withstand the immense bending stresses encountered in deep-hole drilling without snapping.

3. Enhanced Flushing Efficiency
The hollow center of the R32 round rod is precision-drilled to allow for optimal air or water flushing. Efficient flushing is critical for removing cuttings from the hole, preventing "stuck steel" incidents, and cooling the drill bit.

Applications
R32 extension steels are versatile " workhorses " typically used in:
1. Drifting and Tunneling : Perfect for small to medium-sized headings.
2. Bench Drilling : Used in quarries for precise blast hole alignment.
3. Production Drilling : Ideal for underground long-hole mining.

Maintenance Tips for Longer Tool Life

To get the most out of your R32 Round Extension Drill Rods, follow these best practices:

Thread Lubrication: Always use high-quality thread grease to prevent galling and heat buildup.
Avoid "Empty Shaking": Never operate the hammer without the bit being firmly against the rock; this creates reflected shock waves that can crack the rod.
Regular Inspection: Check for "pitting" or surface scratches. Small cracks on the surface of a round rod can quickly lead to total failure under high torque.

R32 Round Extension Drill Rods: The Ultimate Guide to Performance and Durability 0

Ετικέττες:

κομμάτι κουμπιών

τρυπάνι

αντάπτορες στελέχους

Μανίκι συζεύξεων

Μύτη σμίλης

Μύτη σταυρού

ενσωματωμένοι χάλυβες τρυπανιού

Μικρό σχοινί

Τρυπάνια TMT

cnc κατεργασία ακρίβειας

Μικρή σφήκα

Βόρυβο

Κουδούνι με σφυρί

Ροκ Μπόλτ

DTH Hammer Tools

Σωλήνας τρυπανιού βράχου

Διαφύλαξη τρυπών

Συσκευαστικά εξαρτήματα